THERMOPLASTIC PUMPS AND SYSTEMS
Engineered to solve your specific corrosive, abrasive and ultrapure pumping problem
The wet end components of every Vanton pump are made from corrosion and abrasion resistant engineered plastics such as, polypropylene (PP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), and polyvinylidene fluoride (PVDF). Completely inert, these thermoplastics are impervious to acids, caustics, salts, solvents, chlorides, halogens, and other aggressive, abrasive chemicals that can attack pumps made of metals, plastic or rubber lined metals, and fiberglass reinforced plastics.
The industry standard for dependable thermoplastic vertical pump design
- Flows to 900 gpm (204 m3/h)
- Heads to 180 ft (55 m)
- Lengths to 20 ft (6.1 m)
- Temps to 275°F (135°C)
- Construction: PP, PVC, CPVC or PVDF
Horizontal Centrifugal Pumps for all-purpose handling of corrosive,
abrasive and ultrapure liquids
- Flows to 900 gpm (204 m3/h)
- Heads to 185 ft (56 m)
- Temps to 275°F (135°C)
- Construction: PP, PVC, PVDF, ECTFE
Sealless, Self-Priming Peristaltic Pumps
- Flows from .33 gpm to 40 gpm (.07 to 9 m3/h)
- Pressures to 45 psig (310 kPa)
- Temps to 250°F (121°C)
- No stuffing boxes, valves or gaskets
- Dry running
- Self-priming
- Reversible operation
- Two model ranges: Pedestal Mount model XB, and Close Coupled model CC
- Non-metallic wetted components (see Chemical/Material Resistance Chart)
NON-METALLIC TANK/PUMP SYSTEMS
- Lift Stations
- Collection Stations
- pH Neutralization Systems
- Vapor Recovery Systems
- Laboratory/Small-Scale Waste Treatment Systems
MATERIALS OF CONSTRUCTION
Vanton thermoplastics outperform stainless steel and exotic alloys
Engineered OEM Pumps
Engineered thermoplastic pumps for Original Equipment Manufacturers