SP-GA

Flow Switch SP-GA is designed to give an initial alarm at a very low flow and still be capable of allowing a high full liquid flow passing through when pumps or valves are activated by the micro switch. The function is based on fluid flow activation only and therefore it is not affected by changes in static pressure. You have the possibility to chose a set point from 3 l/min up to 70 l/min. The set point is calibrated from factory and can be adjusted in field.

• Switch rating: max 10 A @ 250 VAC
• Pipe sizes: DN25 – DN40
• Min-max swich point: 3 l/min – 70 l/min
• IP class: IP43
• Pressure classes: PN25 
• Micro switch: mechanical SPDT 
• Pipe section: brass
• Housing: aluminum
• Flow range: 0-300 l/min
• Temperature spec: dependent on configuration. Contact Eletta